A new System X® coating will take about 2-3 days to cure to its full strength. During that time, some precautions should be taken.

Curing time is 2-3 days depending on environmental conditions such as humidity and temperature. Take special care during this time period. The coating will help prevent your clear coat from getting water spots as it is hydrophobic, however, it can still get hard water spots. Be especially diligent during the curing process to prevent water spots, which may be costly to remove.

During the curing process avoid:

• Parking under trees especially if there are shedding. You don’t want tree sap on a fresh coating.

• Allowing bird droppings, sap or pollen to sit on the car and bake in the sun.

• Washing or abrading the paint.

If you notice that your car gets water spots, bird droppings, bugs, tree sap, or other contaminants during the first few days, immediately remove it following our care instructions. Keep in mind the coating is still curing. Be gentle when working on the paint.

After Curing is Complete

Removing Contaminants

System X® is extremely slick, this means most things will dissolve and be pulled off by System X’s self-cleaning effect. Use water or a little vinegar to remove bird droppings, bugs, and tree sap. Followed by wiping it off with a soft edge-less microfiber towel.

Washing schedule

For best results the car should be washed on a bi-weekly basis to avoid excessive contamination build-up. Use only recommended mild soaps. Avoid high volume brush style car washes, high PH detergent style cleaners, and bug/tar removers. Avoid washing in direct sunlight to minimize streaking and water spotting. Wash from the top down leaving the dirtiest sections for last to avoid cross-contamination. Use separate soap.

After Washing

Do not wax the coating, many products contain solvents and abrasives.  System X Renew™ is the recommended maintenance and aftercare product. Ask your local installer about purchasing System X Renew™ during your visit or order online.

Automated Washing

Always go to a touch-free wash! Using an automated car wash with brushes will void your warranty. System X® takes 2-3 days to achieve full hardness. Please handle with care and do not wash the vehicle for the first 2 weeks.

Spot Removal

• Never use aggressive products to polish the coating or remove surface contamination.

• Never use excessive force to remove spots.

• Bird droppings, tar, sap, etc. should be removed as soon as possible to avoid temporary staining or hardening on the coating. Any staining left behind from bird droppings will break down over a few days without affecting the coating.